Ladder Cable Tray Roll Forming Machine Line With Easy Joint Necking Ends

Ladder Cable Tray Roll Forming Machine Line With Easy Joint Necking Ends

Brief Descriptions

This cable tray production line is used to produce cable trays with 0.6mm to 1.2mm galvanised steel coils and cold rolled steel coils. Whole line work process is steel coil loading, unwinding, levelling of material, punching holes and slots, roll forming and cutting to length.

Machine Features

• Can produce cable tray with 100mm to 500mm width, 50mm to 100mm height
• Can produce solid bottom cable trays and perforated cable trays
• Roll former can automatically adjust the gap between rollers for producing each dimension
• Hydraulic cutting device integrates with improved technology of necking dies for ends easy joint
• New cutting technology with infinitely adjustable, no need to change blades for each dimension
• H beam steel welded machine base with cast iron roller stands
• Electrically driven rollers via chain and sprocket
• Automatic cable tray production line with PLC control system

Machine Components Of Whole Production Line

There are two sets control system and hydraulic system of the line. One set is for hydraulic punching holes and slots, another set is for controlling roll forming and cutting.

Most Essential Technical Parameters

1. Roller Stations: 27 stations depend on profile and material information

2. Main Forming Power: 11kw x 2

3. Forming Speed: 15m/min

4. Drive: electrically powered driven via 1.2" chain drive

5. Shaft Diameter: 70mm

6. Material of Shaft: 40Cr with treatment

7. Material of Rollers: GCr15 with 0.05mm thick Chrome plated

8. Power for Width Adjust: 2.2kw

9. Power for height Adjust: 1.5kw x 2

10. Cutting Power: 15kw

11. Material of Cutting Blade: SKD11

12. Material of Necking Dies: SKD11

13. Cutting Length Tolerance: ±3mm/10m

14. Angularity Accuracy: ±1.5°/10m

Final Products For Reference

Cable Trays With Necking Ends For Easy Joint

Perforated Cable Trays and Solid Bottom Cable Trays