SHANGHAI BELIEVE INDUSTRY CO., LTD
SHANGHAI BELIEVE INDUSTRY CO., LTD
Add to Cart
2 in 1 Strut Channel Roll Forming Machine For 41x41 and 41x21 Strut Sections
Brief Description
This strut channel making machine can be used to produce 41x41 and 41x21 strut sections. Main material can be roll formed are 1.5mm to 2.5mm thick galvanized steel. Coil goes through unwinding, levelling, servo feeding, punching, entry guiding, roll forming, straightening, cutting and then output the end product.
Machine Advantages
> Economical machine design with twin row type, can produce 2 profiles at the same time
> Material thickness ranges from 1.5mm to 2.5mm
> Good flatness of material by levelling before punching
> High degree of punching precision by servo feeder and high precision power press
> Equipped with Turkey Straightener for good straightness of the final products
> Exact accuracy of cutting length
> Low burr cutting with low noise by hydraulic mold cutting device
> High degree of automation and greatly reduce the labor force
> Working parts are covered with protective mesh for human and machine safety
Each Part of Whole Strut Channel Roll Forming Line
| No. | Description | Qty |
| 1. | 3Ton Electric Decoiler | 1 set |
| 2. | 7-Roller Leveller | 1 set |
| 3. | 80Ton High Speed Power Press With Servo Feeder | 1 set |
| 4. | Main Roll Forming Machine (twin row type) | 1 set |
| 5. | Turkey Straightener | 1 set |
| 6. | Hydraulic Cutting Device | 1 set |
| 7. | Output Support Table | 1 set |
| 8. | Electric Control System | 2 sets |
| 9. | Hydraulic System | 1 set |
| 10. | Water Cooling System | 1 set |
Machine Layout And Strut Channel Profile Drawing For Reference
