SHANGHAI BELIEVE INDUSTRY CO., LTD
SHANGHAI BELIEVE INDUSTRY CO., LTD
Add to Cart
50mm / 300mm / 450mm / 600mm Width Cabling Heavy Duty Electric Cable Ladder Roll Forming Machine
This cable tray roll forming line can produce 150mm 300mm 450mm and 600mm width cable ladder trays. Whole production line is consisted of decoiler, levelling unit, punching unit, roll forming unit, cutting device, control system and hydraulic system, etc.
With the automatic width adjustment design, users only need to key in the width of the cable trays, then the rollers will move accordingly for roll forming required widths. Main material can be used are galvanized steel coils, powder coated steel coils, cold / hot rolled steel coils with 1.0mm to 3.0mm thickness.
Main Components of the Cable Ladder Production Line
| 1. | Decoiler & Leveller | Integrated design of the decoiler and leveller |
| 2. | Punching Unit | Hydraulic powered punching device |
| 3. | Roll Forming Unit | Electrical motor drive via chain |
| 4. | Cutting Unit | Hydraulically powered cutting type; stop-cutting; need to change cutting blades for each size |
| 5. | Runout Table | Unpowered type, for supporting the finished products |
| 6. | Electric Control Cabinet | Two sets, one for punching holes and slots, one for roll forming and cutting |
| 7. | Hydraulic System | Two sets, one for punching, one for cutting |
Working Process: decoiling - material levelling - punching or embossing - roll forming - cutting - final product
Main Technical Parameters
1. Material Information
1.1 Raw material: cold rolled steel coils; hot rolled steel coils; stainless steel coils
1.2 Material thickness: 1.0-3.0mm
1.3 Material strength: mild steel; 235-345Mpa
2. Machine Specifications
2.1 Machine length: approx. 15 meters
2.2 Machine width: approx. 1.5 meters
2.3 Machine height: approx. 1.2 meters
3. Technical Parameters
3.1 Roller stations/Forming Steps: 20-28 stations
3.2 Main power: 15kw * 2 electric motor for roll forming
3.3 Width adjustment: 1.5kw * 2 electric motor for width adjustment
3.4 Hydraulic power: 7.5kw for punching and embossing and cutting
3.5 Levelling unit: 7-roller for levelling, up 3 and bottom 4 rollers
3.6 Material of levelling unit: 40Cr solid shaft with 120mm diameter
3.7 Material of punching mold: Cr12Mov, HRC58-62
3.8 Material of rollers: GCr15 with vacuum heat treatment, surface with chromed plated
Cable Ladders Samples For Reference
If you need more machine details, please contact us directly.